Electronics Kit 1.2

Home
Mount TB6560
Wire TB6560 to Power Sup
Wire AC Relay
Wire E-Stop
Wire Limit Switches
Mach3 EStop/Limits TB6560
Mach3 Pins/Ports

 

Electronics Kit 1.2 Instructions

 

Please note:

The TB6560 driver board is no longer sold by us and hasn't been since mid-2013 due to high number of problems related to this item. The units sold by us where tested prior to shipping and only boards that met our 100% fully functional standard where dispatched. Our fail rate during testing exceeded 60% (100% in the last batch of 10). The most common failing during testing was non-functional limit switches, the next was one or more axis not working. We recommend full testing on delivery.

Support and advice. Over half of all emails received  are in relation to the TB6560 Driver board and it's issues. We will help out as best we can and when we can but we would like to recommend when you have issues (ie. you cannot get it to work) that you contact "your supplier" first as we have 0% financial incentive to support another vendors product.

These instructions. We are quite happy for anyone who has this item to use our instructions and we genuinely hope they are of use to you. These instructions where accurate as at mid-2013 and ask the reader to exercise discretion as the product may have been upgraded or changed in someway since there completion.

 

Electronics Kits 1.1 and 1.2

Mounting Electrics/Electronics:

 

Initial setup of Power chassis

Power chassis

Auxiliary socket panel

Power supply

TB6560 board

Stepper motors

Relay

DC to DC converter

Cooling Fan

Emergency stop button

limit switches

 

 

Wiring Electrics/Electronics:

Setting up the power supply:

1.    Connecting Power supply without Power chassis (straight to lead)

2.    Connecting Power supply via Power chassis

3.    Connecting Power supply via Power chassis with Auxiliary power panel.

 

Connecting TB6560 board to Power Supply

 

 

Connecting Stepper motors to TB6560 board



 

Connecting Relay to TB6560 board

 

 

Connecting 12v DC to DC converter and Fan to Power supply

 

 

Connecting Emergency stop button to TB6560 Driver Board

 

 

Wire Limit Switches at the Axis

 

 

Connecting Limit switches to TB6560

 

 

 

Configuring MACH3 Software

 

TB6560 Pins, Ports and onboard Relay

 

 

TB6560 Emergency stop button and Limit switches

 


 

Home | Mount TB6560 | Wire TB6560 to Power Sup | Wire AC Relay | Wire E-Stop | Wire Limit Switches | Mach3 EStop/Limits TB6560 | Mach3 Pins/Ports

This site was last updated 06/28/14