Wire an SSR to a TB6560 BOB 4

Wire an SSR to a TB6560 BOB

DO NOT HAVE YOUR ELECTRONICS, ROUTER OR OTHER DEVICES PLUGGED IN WHILE YOU WORK ON THEM!
Check that you can see the pronged plugs of the router and electronics are not plugged in.
Best practice – hold the plugs in your hand and visually trace the cords back to the router and electronics enclosure. This will confirm they are not plugged in.

STEP 05

Configure Software to run an SSR

Your SSR is now physically wired and needs to be configured in your software to work. Please choose one of the configuration instruction sets below that suits the control software you are using: